Please contact the manufacturer if operating conditions are non-standard.
Further technical data is given in the STAHL catalogue or is available upon request.
The temperature class depends upon where the protective enclosure is installed.
Change the Miniature Circuit-Breaker at the end of its service-life to guarantee ongoing
protection!
Upstream fuse/downstream Miniatur Circuit-Breaker for back-up protection I
kA (80 kA, 400 V with fuse)
7
Arrangement and assembly
These circuit-breakers are explosion-protected devices to IEC/EN 60079-0. They must
be fitted into an enclosure with type of protection increased safety "e", e.g. enclosure
type 8146/5 from R. STAHL Schaltgeräte GmbH.
7.1 Mounting orientation
04934T00
149915 / 8562606300
S-BA-8562-03-en-20/11/2008
Vertical,
Terminals 1, 3, 5 at the
bottom
Arrangement and assembly
Residual current circuit-breaker with
integral overcurrent protection
8562/5
: 100
cc max
7