Installing Camera - IMOU Floodlight Cam Kurzanleitung

WARNNING
Risk of electrical shock.
1. Be sure to disconnect the power at the fuse or circuit breaker before
installation.
2. Verify that the supply voltage is correct. Connect xture to a 100 ~240V
AC 50/60 Hz power source.
3. Properly ground xture.
4. Always follow code standards when installing wired connection.
5.We strongly suggest you hire a licensed electrician to install the camera.
Risk of fire.
Do not connect near combustible or ammable surfaces.
Note:
Make sure the mounting surface is strong enough to hold at least three times
of the device weight.

Installing Camera

With power o at the breaker, remove the existing oodlight from the junction
1
box it is attached to and disconnect the wires. Inspect the junction box to make
sure water cannot get into it.
2
Install the mounting plate:
With junction box
Stick the mounting plate to the
junction box.