IMOU Floodlight Cam Kurzanleitung Seite 7

Without junction box
Note:
1. If there is a mounting plate attached to your junction box, remove that
as well.
2. If you do not have an existing junction box, you will need to hire a licnsed
electrician to install one. Also be sure to comply with your local codes.
Turn the adjustment knobs to loosen the lights, and then adjust the light angles
3
to give space to the mounting screw.
4
Hook one end of the hook into the hole on the mounting plate, and the other end
to the edge of the camera, so you can free your both hands for the installing.
Install the mounting plate to the middle
of the opening with the expansion bolts
and self-tapping screws.