IMOU Floodlight Cam Kurzanleitung Seite 8

The copper wire from the camera
5
is ground wire. Connect the
ground wires together. use one of
the supplied wire nuts if necessary.
Put away all the wires, attach the
7
camera to the mounting plate,
and x the camera with
mounting screws.
Connect the power wires.
6
1. The white wire from the camera is
neutral wire, connect this wire to the
reserved neutral wire.
2. The black wire from the camera is hot
wire, connect this wire to the reserved
hot wire.
Fix those two joints with wire nuts .
Adjust the light and lens angle,
8
and keep the PIR detetor parallel
to the ground to ensure optimal
detection.