Installing Camera - Imou Ranger Iq Kurzanleitung

4

Installing Camera

Note: Make sure the mounting surface is strong enough to hold at least three times
of the device weight.
Step 1 Drill screw holes on the mounting
surface as the mounting plate
shows, and then put in the
expansion bolts.
Step 2 Attach the mounting plate to the
mounting surface with the self-
tapping screws.
Step 3 Attach the camera to the mounting
plate, then power it up, and then,
adjust the lens to the ideal angle.
About the Guide
- This quick start guide is for reference only. Minor difference might be found in
user interface.
- All the designs and software here are subject to change without prior written
notice.
- All trademarks and registered trademarks mentioned are the properties of their
respective owners.
- Please visit our website or contact your local service engineer for more
information.
- If there is any uncertainty or controversy, please refer to our final explanation.
4