imilab EC4 Benutzerhandbuch Seite 14

Caomera LED Status
Power On/Off
Camera Charging
Camera Reset
PIR Detection sensitivity
adjustment
Press and hold the sync
button for 2 seconds until
the blue light becomes too
solid
Press and hold the sync
button for 8 seconds until
the LED blinks red
Use USB to charge the
camera, red blinks three
times
Solid green
Press and hold the sync
button for 5 seconds until
the LED blinks blue,
release the button
Blinking blue
Solid blue (turn off after 5
seconds)
Blue and orange blinks 3
times alternately
Orange blinks once
Orange blinks continuously
14
Status
You will hear the power-on
music
You will hear the power-off
music
Starts charging
Fully charged
Reset successfully
Reset Successfully
Pairing Successful
Pairing Failed
PIR detects motion
PIR continues to detect
motion