Markings In The Text; Warranty; Contact To Heylo Gmbh; Safety - HEYLO BT 60 Betriebsanleitung

Markings in the text

– Listings are indicated by an indent mark (–).
– Text that is highlighted in this way, highlights
references and hyperlinks that refer to related
topics, internet addresses, and other related in-
formation.
– Text that is in bold refers to emphases or sub-
headings.
– Menu items, tabs, buttons, and softkey buttons
are set inside angle brackets <...> such as
<stop>.
– Sequences are set in angle brackets <...> such
as <login/semi-automatic/start>.
– Keys or indicator lights on a keyboard or control
panel are enclosed in square brackets, for ex-
ample [Start].
– Text marked this way SPS indicates a cross-
reference to the glossary together with a defini-
tion.
Action instructions
As a rule, action instructions have the following
structure:
✓ Conditions that are necessary in order for the
action to be carried out may also be referred to
here.
a) These are followed by operating steps
b) Another operating step
 Partial result after one operating step
c) Another operating step
 Overall result of an action instructions
12.4

Warranty

In general, the "General Terms and Conditions of
Sale and Delivery" of HEYLO GmbH shall apply.
Intended use is the prerequisite for the claim for
statuatory liability for material defects within the first
two years of the date of purchase.
12.5

Contact to HEYLO GmbH

If you have any questions about the device, please
get in touch with your sales partner.
We will also gladly provide information ourselves.
Please get in touch with HEYLO GmbH by mail, e-
mail or phone, or submit a query form through our
website, quoting:
– Your name and address,
– contact person at your company,
– data printed on type plate: type, serial no. and
year of manufacture
EN
Address: HEYLO GmbH
Im Finigen 9
28832 Achim
Phone: +49 (0) 4202 / 97 55 0
Fax: +49 (0) 4202 / 97 55 97
E-mail: info@heylo.de
Internet: http://www.heylo.de
13

Safety

The device has been designed and manufactured
according to best engineering practice and conforms
to all relevant safety rules. However, incorrect op-
eration can pose a risk to life and limb of the opera-
tor or third parties. Improper operation can also lead
to damage to the device and other property.
Only use the device:
– for the purpose for which it is intended,
– when it is in proper working order.
Following a fault that might affect the safety of the
device, do not restart the device until you have en-
sured yourself that the fault has been fully eliminat-
ed.
Persons who install, operate, service or clean the
device must be aware of the hazards that may arise
from electrically powered equipment in environments
with a high air humidity, and they must have read
and understood this operating manual.
Avoiding hazardous situations
The following instructions apply to all work on or with
the device:
– A complete and legible copy of this operating
manual must be kept at hand, near the place
where the device is used.
– The device may only be used for its intended
purpose.
– The device must be kept in proper working or-
der. Before using the device, its condition must
be checked.
– All relevant accident prevention regulations and
other applicable safety rules must be strictly ad-
hered to.
Information on electrical equipment
The following general safety rules apply to all work
on electrical equipment:
– The device is electrically powered. There is a
risk of fatal injury from faulty installation of the
electrical system or from a breakdown of the in-
sulation during operation.
– All work on the electrical equipment must be car-
ried out by a qualified electrician. Always keep
switchboxes closed.
Dehumidifier BT 60
25 / 42