Cleaning The Milk Container Unit - Philips Senseo HD7850 Kurzanleitung

9 10
Select the desired For black
coffee variety. choose a small, medium
or large cup.
For a reliable performance of the milk container unit and consistently good frothing results, it is very
important that you follow each of the 2 cleaning procedures below:
A Flush the milk container unit with the CLEAN button immediately after use when you do not intend
to froth milk again straightaway.
B Clean all parts of the milk container unit thoroughly after the last use of the day.
A Flushing after every use with the CLEAN button
1 2
Lift the lever and remove Rinse the milk container
the milk container unit under the tap and fill it
from the machine. with cold water.
B Cleaning all parts after last use of the day
1 2
Remove the milk Open the blue milk
container lid. container lid cover.
5 6
Clean the milk container, Push back the steam inlet,
connect the milk tube
milk container lid and milk
tube in the dishwasher firmly onto the connector
(recommended) or in hot of the milk container
water with some washing- lid and close the milk
up liquid. Rinse the parts container lid cover.
with fresh water after
cleaning.
11
coffee only: Place 1 or 2 cups under
the spout and press
(for black coffee only)
to brew coffee.

Cleaning the milk container unit

3
Reinsert the milk
container and place an
empty cup on the cup
tray.
3
Pull out the blue steam
inlet.
7
Reattach the lid, place
the milk container unit
in the machine and
press down the lever.
caffè latte
latte macchiato
cappuccino
black coffee
Tip: Pre-heat your cups
or with hot water to keep
the coffee hot longer.
4
Press the CLEAN button.
4
Pull off the milk tube.