Cleaning The Milk Container Unit - Philips SENSEO Сappuccino Select HD7853/70 Bedienungsanleitung

cleaning the milk container unit

For a reliable performance of the milk container unit and consistently good
frothing results, it is very important that you clean the milk container unit
regularly and thoroughly.
If you do not plan to froth milk again straightaway, rinse the milk
1
container within 30 minutes after use.
After the last use of the day, clean all parts of the milk container
2
unit thoroughly.
For proper cleaning, follow the procedure described below.
Note: If you are unable to obtain high-quality frothed milk, the milk container
unit is probably dirty.
rinsing after every use
1 Pull the milk container lever upwards with your finger to release the
milk container unit. Then pull the milk container unit forwards to
remove it from the machine.
2 Press the milk container lid release lever (1), tilt the milk container
lid slightly (2) and pull the milk container lid upwards to remove it
from the milk container (3).
3 Pull the release tab at the front of the milk container lid cover
upwards to open the cover.
4 Open the steam inlet by pulling it forward (1) and then move the
steam inlet to the right (2). This part stays attached to the lid by a
hinge.
Note: You can only open the steam inlet if the milk container lid cover is open.
EnglisH
15