Cleaning The Milk Container Unit - Philips SENSEO HD7850 Kurzanleitung

9
Select the desired
coffee variety.
For a reliable performance of the milk container unit and consistently good frothing results, it is very
important that you follow each of the 2 cleaning procedures below:
A Flush the milk container unit with the CLEAN button immediately after use when you do not intend
to froth milk again straightaway.
B Clean all parts of the milk container unit thoroughly after the last use of the day.
A Flushing after every use with the CLEAN button
1
Lift the lever and remove
the milk container unit
from the machine.
B Cleaning all parts after last use of the day
1
Remove the milk
container lid.
5
Clean the milk container,
milk container lid and milk
tube in the dishwasher
(recommended) or in hot
water with some washing-
up liquid. Rinse the parts
with fresh water after
cleaning.
10
For black coffee only:
choose a small, medium
or large cup.
2
Rinse the milk container
under the tap and fill it
with cold water.
2
Open the blue milk
container lid cover.
6
Push back the steam inlet,
connect the milk tube
firmly onto the connector
of the milk container
lid and close the milk
container lid cover.
11
Place 1 or 2 cups under
the spout and press
(for black coffee only)
to brew coffee.

Cleaning the milk container unit

3
Reinsert the milk
container and place an
empty cup on the cup
tray.
3
Pull out the blue steam
inlet.
7
Reattach the lid, place
the milk container unit
in the machine and
press down the lever.
caffè latte
latte macchiato
cappuccino
black coffee
Tip: Pre-heat your cups
or with hot water to keep
the coffee hot longer.
4
Press the CLEAN button.
4
Pull off the milk tube.