Tandberg Data
If you move the write-protect switch ...
To the left, the tape is write-protected; the
orange indicator on the cartridge shows
To the right, the tape is write-enabled
If you move the write-protect switch ...
From the write-protected position to write-
enabled
From write-enabled to write-protected
3-18
Configuring and Operating the Tandberg DLT4000 Drive
3.6.2. Data Protection
Then ...
You cannot write data to the tape.
You can write data to the tape (if it is
not software write-protected).
Then ...
The tape becomes write-enabled
after a variable amount of time
(seconds).
The tape becomes write-protected
after a variable amount of time
(seconds).
Tandberg DLT4000 Installation Guide