Connect The Cables; Examine The Tandberg Dlt4000 Rear Panel; Connect The Scsi Signal Cable; Terminate The Scsi Bus - TANDBERG DLT4000 Installations-Handbuch

Tandberg Data
Tandberg DLT4000 Installation Guide
Installing and Configuring the Tandberg DLT4000 Drive
2.5.

Connect the Cables

Topic
Examine the Tandberg DLT4000 Rear Pa 2.5.1.

Connect the SCSI Signal Cable

Terminate the SCSI Bus

Selecting the Correct AC Power Cord
Connect the Power Cord
2.5.1. Examine the Tandberg DLT4000 Rear
Panel
Section
2.5.2.
2.5.3.
2.5.4.
2.5.5.
2-7