TANDBERG DLT4000 Installations-Handbuch Seite 20

Tandberg Data
If ...
All the events in Table 2-2 took
place
All left- or right-side indicators on
the Tandberg DLT4000 front panel
blink only
2-12
Installing and Configuring the Tandberg DLT4000 Drive
2.6.2. What to Do after POST
Then ...
POST succeeded. Bring up the system
and run the optional system tests. See
Chapter 3 for operating the drive and
selecting density.
POST failed. See Table 2-4.
Tandberg DLT4000 Installation Guide