Indicator Action During Power-On Selftest And Operation - TANDBERG DLT4000 Installations-Handbuch

Tandberg Data
Stage
1
2
3
4
3-12
Configuring and Operating the Tandberg DLT4000 Drive
3.5.4. Indicator Action during Power-On
Selftest and Operation
What Happens
The indicators on the right front panel turn on sequentially from top
to bottom. All indicators stay on for a few seconds.
The indicators on the left front panel turn on at the same time for
about three seconds and then turn off.
The green Operate Handle, the orange Write Protected, and the
yellow Use Cleaning Tape indicators turn off. The yellow Tape in
Use indicator blinks while the tape drive initializes.
After initialization, the drive is in one of the following four states:
Tandberg DLT4000 Installation Guide