Beurer IL 11 Gebrauchsanleitung Seite 5

Use
Remove all packaging material before using the appliance. Before use, check whether the infrared lamp
is properly screwed in. Always ensure that the appliance is on a secure and even surface. The distance
between the infrared lamp and the radiated part of the body should not be less than the following:
IL 11: at least 24 in (60 cm)
IL 21: at least 32 in (80 cm)
Always close your eyes during the radiation! The recommended duration of treatment is maximum
12 minutes.
We recommend selecting a shorter radiation period to start with. However, the skin of some people may
show an over-sensitive (e.g. with extreme redness, blistering, itching, heavy sweating) or allergic reaction
to heat radiation, even when the lamp is used correctly. Examine the radiated section of the body regu-
larly. Discontinue radiation immediately if any signs of an over-sensitive or allergic reaction appear and
consult a physician.
The appliance has an adjustable lampshade. The 5 positions of inclination make it possible for you to
adjust the infrared lamp according to your needs.
cleaning/changing the infrared lamp
Before every cleaning and when exchanging the infrared lamp, the appliance must be switched off, dis-
connected from the mains and must be cool.
The appliance can be cleaned with a damp cloth. Do not use any cleaning agents containing solvents
on the appliance. Ensure that no water penetrates the appliance. Use the appliance again only when it is
completely dry. Please note that only infrared lamps of the original type may be used as replacements.
Appliance: Replacement infrared lamp (type):
IL 11 Infrared R95 E (100 W)
IL 21 Infrared PAR 38 E (150 W)
!
Important information –
Please retain for later use
Please read the information carefully and keep it accessible for other users.
• The lamp housing and the infrared lamp become very hot during operation. There is a risk of burning if
these are touched. Always let the lamp cool down first before touching it.
• Remove all packaging material before the appliance is used.
• The appliance may only be connected to the mains voltage mentioned on the type plate.
• While using the lamp on the face, always keep the eyes closed in order to avoid injury to the eyes (do
not look directly at the infrared light).
• This device is not intended for use by persons (including children) with restricted physical, sensory or
mental capabilities and/or by persons lacking the required understanding of the equipment and how
it is used, unless they are supervised by a person who is responsible for their safety or they are given
instructions on how to use the device.
Children should be supervised to ensure that they do not use the device as a toy.
• Do not use it on persons sensitive to heat.
The sensitivity to heat can be reduced or increased in the following cases:
– diabetic patients
– persons with sleepiness, dementia or difficulties concentrating
– persons with illness-related skin changes or persons with scarred skin areas in the application area
– persons with allergies
– children and older persons
– after consuming medications or alcohol
• In case of acutely inflammatory processes, radiation should only be carried out after consulting a doctor.
specifications:
230V ~ 50 Hz
230V ~ 50 Hz
5
Explanation of symbols:
Note - read operating
instructions.
Application part Type B
Prwotection class II unit
Caution: hot surface