Standard Ear Moulds (Domes) And Custom Ear Moulds (Clic Moulds); Cleaning Ear Moulds - Audio Service MOOD G2 Gebrauchsanweisung

66
STANDARD EAR MOULDS (DOMES) AND
CUSTOM EAR MOULDS (CLIC MOULDS)
CAUTION
Risk of injury from using external receiver and ear mould
incorrectly.
Always wear the external receiver with an ear mould.
Ensure that the external receiver is properly connected
to the ear mould.
On rare occasions, the ear mould may remain in your
ear when you remove the hearing system. In such cases,
have the ear mould removed by a medical professional.
Place the external receiver with the ear mould carefully
and not too deeply in the ear.
Wear the external receiver and the ear mould only as
described in this manual.
Your hearing system has one of the following ear moulds:
Dome
MAINTENANCE AND CARE
CLIC MOULD
MAINTENANCE AND CARE

CLEANING EAR MOULDS

Cerumen (earwax) on the ear
mould affects the quality of sound
negatively.
Always clean the ear moulds as soon
as you have removed them from
your ear. The cerumen will then not
dry out and harden.
Remove cerumen with a soft cloth.
No other tools are required.
If cerumen has dried and hardened, wet a soft cloth with a ceru-
men removal solution. Dab the ear mould with the cloth and wait
for a moment until the cerumen is loosened.
If you use a dome: Clean it by
squeezing the tip of the dome.
67