Program Selection; With Remote Control (Mood G2 And Sun) - Audio Service MOOD G2 Gebrauchsanweisung

58

PROGRAM SELECTION

USING A SINGLE PUSH BUTTON (RIXX G2)
Press the push button briefly. The hearing
system switches to the next program.
USING A SLIDING SWITCH (SUN)
Slide the switch up once to change to
the next program.
Slide the switch down once to change to
the previous program.
If the sliding switch is configured to fulfill the "Changing the hear-
ing program" function, it is not possible to use it for volume control
(see page 60).
PROGRAM SELECTION PROGRAM SELECTION
USING A ROCKER SWITCH (MOOD G2)
Press briefly or for approx. 2 seconds on the top
of the switch to switch to the next program.
Press briefly or for approx. 2 seconds on the
bottom of the switch to switch to the previous
program.
The length of time required depends on the pro-
gramming of the switch; see overview on p. 75.

WITH REMOTE CONTROL (MOOD G2 AND SUN)

See the remote control user manual.
Over and above this, select hearing system models make
it possible for further functions controlled by a push but-
ton or a switch to be added. Please ask your hearing sys-
tem specialist to tell you more about this. See also the
overview on p. 74-75.
59
2 5 2 5