Troubleshooting - Audio Service MOOD G2 Gebrauchsanweisung

70

TROUBLESHOOTING

Problem Possible solution
Replace or recharge the flat battery.
Volume low.
Clean or replace the ear mould.
Have the microphone cover replaced.
Increase the volume setting.
Insert the ear mould so that it fits closely
Feedback whis-
and well.
tling from the
Reduce the volume.
hearing system.
Clean or replace the ear mould.
Reduce the volume.
Tone distorted.
Replace or recharge the flat battery.
Clean or replace the ear mould.
Replace or recharge the flat battery.
Signal tones
from hearing
system.
Turn on the hearing system.
Hearing system
Carefully close the battery compartment
not working.
fully.
Replace or recharge the flat battery.
Check that the battery has been inserted
correctly.
Power-on delay is active.
Wait for approx. 12 seconds and then check
again.
TROUBLESHOOTING TROUBLESHOOTING
Consult your hearing system specialist if you have any further
questions.
NOTE
Your hearing systems have been developed in accordance with
international electromagnetic compatibility standards. How-
ever, they may still encounter interference from electrical de-
vices in the vicinity. If you encounter this, move further away
from the source of the interference.
71