Herunterladen  Diese Seite drucken

Connecting The Power Cable - Pioneer AVD-W8000 Anleitung

Color lcd rear display
Vorschau ausblenden

Werbung

A Title (English)

Connecting the Power Cable

Hide-away Unit
Power cable
15 cm
Fuse resistor
Fuseholder (4 A)
Note:
When replacing the fuse, be sure to use
only a fuse of the rating prescribed on the fuse
holder.
Parking brake switch
Power supply side
Note:
The position of the parking brake
switch depends on the vehicle model. For
details, consult the vehicle owner's manual
or dealer.
Note:
• Cords for this product and those for other products
may be different colors even if they have the same
function. When connecting this product to another
product, refer to the supplied installation manuals
of both products and connect cords that have the
same function.
• The red and yellow leads should be connected to
the opposite side of the fusebox terminals from the
battery.
RCA VIDEO OUTPUT (Yellow)
black
Red
Yellow
Light green
Ground side
GROUND
To vehicle (metal) body.
ACC
To the electric terminal controlled by the ignition
switch (12 V DC) ON/OFF.
Do not connect this lead to power source terninals to
which power is continuously supplied. If the lead is
connected to such terminals, the battery may be
drained.
+ BATTERY
To the terminal always supplied with power
regardless of ignition switch position.
PARKING BRAKE
Used to detect the ON/OFF status of the parking
brake. This lead must be connected to the power
supply side of the parking brake switch.
Connecting method
Clamp the parking
brake switch power
supply side lead.
Clamp firmly
with needle-nosed
pliers.
28

Werbung

Inhaltsverzeichnis
loading

Kommentare zu diesen Anleitungen

Symbole: 0
Neueste Anmerkung: