Connecting The Power Cord - Pioneer AVH-5300DVD Installationsanleitung

Section
01 Connecting the units

Connecting the power cord

Microphone (supplied)
(AVH-6300BT only)
Note:
Depending on the kind of vehicle, the
function of 2* and 4* may be different.
In this case, be sure to connect 1* to 4*
and 3* to 2*.
ISO connector
Note:
In some vehicles, the ISO connector may be divided
into two. In this case, be sure to connect to both
connectors.
4
En
Wired remote input (WIRED REMOTE INPUT)
Hard-wired remote control adaptor can be connected (sold separately).
Microphone input Jack (MIC)
(AVH-6300BT only)
4 m
2* 1*
4* 3*
Yellow (2*) Yellow (1*)
Back-up Connect to the constant 12 V
(or accessory) supply terminal.
Red (4*) Red (3*)
Accessory Connect to terminal controlled by
(or back-up) ignition switch (12 V DC).
Orange/white
Connect to lighting switch terminal.
Black (chassis ground)
Connect to a clean, paint-free metal location.
17 cm
17 cm
This product
Connect leads of the same
color to each other.
Fuse resistor
Fuse resistor
Speaker leads
Front left 
White:
Front left 
White/black:
Front right 
Gray:
Front right 
Gray/black:
Rear left  or subwoofer 
Green:
Rear left  or subwoofer 
Green/black:
Rear right  or subwoofer 
Violet:
Rear right  or subwoofer 
Violet/black:
RGB input