Adjust Device Position; Connecting To Power - Z-EDGE R1 Bedienungsanleitung

Note: Consult your vehicle's technical manual or consult a professional if you are
not sure how to remove interior panels.
WARNING:
Do not install the device on a tinted window - doing so may damage the
tint film.

2.3 Adjust Device Position

1. Loosen the nut to swivel the device vertically. Click into place and secure by
tightening the nut.
2. Swivel the device horizontally for a clear view.
1

2.4 Connecting to Power

Use only the supplied car adapter to power the dashcam and charge the built-in
battery.
1. Plug one end of the USB charging cable into the Mini USB port on the dash
camera (7).
2. Plug the other end into the car charger, and insert that into your vehicle's
lighter socket.
Automatic Power
• Once the vehicle's engine is switched on, the dashcam automatically powers on.
• When the vehicle engine is switched off, the dashcam automatically saves the
recording and power off within 10 seconds.
2
-7-