Installation - Z-EDGE R1 Bedienungsanleitung

2.2 Installation

Please follow the below instructions for mounting your dashcam to the
windshield of your vehicle:
Front Camera Installation
1. Slide the car mount into the slot on top of the device until a click sound is heard.
2. Connect the dash camera to the power outlet in your car, (see 2.4)
3. Turn the camera on, whilst looking at the display screen, find a suitable
location for installing your dashcam on your windshield.
4. Press the suction-cup firmly against your windshield, and rotate the lever
clockwise (12 o'clock) to secure.
5. Use the hand tool provided to tuck the power cable into the headliner.
6. In most cases, the power cable can be tucked behind the rubber trim along
the A-pillar and doorframe, use the hand tool provided or gently tug on the
rubber trim to remove it to make room for the power cable. The rubber trim
can be replaced after using the hand tool. In rare cases, it may be necessary
to remove the A-pillar cover.
-5-