Set Date & Time; Language - Z-EDGE R1 Bedienungsanleitung

Manual Power
• To manually turn the power on, press and hold the 'Power' Button (2) for up to
3 seconds.
• To manually turn the power off, press, and hold the 'Power' Button (2) for 3
seconds.
WARNING:
If the environment reaches 115-degrees Fahrenheit or above, the car charger
may stop charging the dash cam battery. This is characteristic of a Lithium
Polymer battery and is not a malfunction.
2.5 Set Date & Time
Before using the device, we recommend you set the correct date and time:
1. If the device is recording, short press the 'OK' button (11) to stop recording,
and enter Standby Mode.
2. Press the 'Menu' button (8) to enter the General Settings menu.
3. Press the 'Up' and 'Down' buttons (9 & 10) to select Date/Time and press the
'OK' button (11) to confirm.
4. Press the 'Up' and 'Down' buttons (9 & 10) to adjust the values and then press
the 'OK' button (11) to confirm and move to the next field.
5. With all fields correct, press the 'OK' button (11) to save and exit the menu.
WARNING:
Date/Time settings may automatically reset themselves if the battery is
allowed to drain completely.

2.6 Language

The language can be set from the language menu.
1. Press the 'Menu' button (8) to enter the General Settings menu.
2. Use the 'Up' and 'Down' buttons (9 & 10) to choose the language menu.
3. Press the 'OK' button (11) to confirm.
4. Press the 'Up' and 'Down' buttons (9 & 10) to choose the desired language
and then press the 'OK' button (11) to confirm the option.
5. The 'Menu' button (8) can be used to return from the menu. General Settings
> Language >English / Chinese (Simp) / Chinese (Trad) / German / Japanese
-8-