krick ARIADNE Baubeschreibung Seite 61

Now would also be the right time to prime and
varnish the deck.
In the next step the hull can be painted. To do
this, align the model in the stand so that the
bow tip is 33 cm high. Use a waterline marker
which you set to 24.5 cm height to mark the
waterline. You can now mask the waterline
with suitable adhesive tape and paint it.
Status July 2019
The window frames on the body can be found
on the brass etched parts plate.
Stick the windows to the marked positions.
Also glue the portholes to the rear wall of the
superstructure. Stain the superstructure door
part 62, prime with pore filler and varnish. It
can then be glued to the structure.
Page 19
82
62
150
©
Krick Modelltechnik Knittlingen Germany