Flexible Induction Cooking Area - AEG IPE84571IB Benutzerinformation

Auto‐
matic
light
Mode H6 On
1) The hob detects the boiling process and acti‐
vates the fan speed in accordance with the au‐
tomatic mode.
2) The hob detects the frying process and acti‐
vates the fan speed in accordance with the au‐
tomatic mode.
3) This mode activates the fan and the light and
does not rely on the temperature.
Changing the automatic mode
1. Deactivate the appliance.
2. Touch for 3 seconds.
The display comes on and goes off.
3. Touch for 3 seconds.
4. Touch a few times until
5. Touch of the Timer to select an
automatic mode.
When you finish cooking and deactivate the
hob, the hood fan may still operate for a

6. FLEXIBLE INDUCTION COOKING AREA

WARNING!
Refer to Safety chapters.
6.1 FlexiBridge function
The flexible induction cooking area consists
of four sections. The sections can be
combined into two cooking zones with
different size, or into one large cooking area.
The sides of the zones which operate
together light up, and they are linked with
shorter illuminated lines. You choose the
combination of the sections by choosing the
mode applicable to the size of the cookware
you want to use. There are three modes:
Standard (activated automatically when you
activate the hob), Big Bridge and Max Bridge.
Boiling 1) Frying 2)
Fan speed Fan speed
2 3
comes on.
certain period of time. After that time the
system deactivates the fan automatically and
prevents you from an accidental activation of
the fan for the next 30 seconds.
To operate the hood directly on
the hood panel deactivate the
automatic mode of the function.
Operating the fan speed manually
You can also operate the fan from the hob
manually.
Touch when the hob is active.
This deactivates automatic operation of the
function and allows you to change the fan
speed manually.
When you press , you raise the fan speed
by one. When you reach an intensive level
and press again, you set the fan speed to
0 which deactivates the hood fan. To start
the fan again with the fan speed 1 touch
To activate an automatic
operation of the function,
deactivate the hob and activate it
again.
To set the heat setting use two
left side control bars.
Switching between the modes
To switch between the modes use sensor
field: .
.
ENGLISH 57