imilab EC4 Bedienungsanleitung Seite 14

Camera LED Status
Press and hold the sync
button for 2 seconds until the
Power on/off
blue light becomes to solid
Press and hold the sync
button for 15 seconds until
the LED blinks red
Use USB to charge the camera,
Camera
Red blinks three times
charging
Solid green
Press and hold the sync button
for 8 seconds until the LED
blinks blue, release the button
Blinking blue
Camera
reset
Solid blue
(turn off after 5 seconds)
Blue and orange blinks 3 times
alternately
PIR
Orange blinks once
detection
sensitivity
Orange blinks continuously
adjustment
You will hear the power-on music
you will hear the power-off music
(The camera will reboot during
PIR detects motion
PIR continues to detect motion
EN-12
Status
Starts charging
Fully charged
Start resetting
the reset process)
Reset successfully
Pairing Successful
Pairing Failed