Select A Start Time - Silvercrest SMW 900 EDS A1 Bedienungsanleitung

Select a start time

With this programme you can preset a specific start
time for the cooking or grilling of the foodstuff. If the
programming is carried out correctly, the appliance
starts automatically at the programmed time.
Take note: The clock must be correctly set to be
able to select the function "Selecting the start
time"..
1. Enter the desired cooking program:
• For microwave operation: Press the button
Operation r
times to set the required power level. Programme
the cooking time with the control dial 0.
• For grilling: Press the button Grill
the desired grill function is activated. Set the re
quired cooking time with the control dial 0.
• For convection operation: Press the button Con
vection 9 the appropriate number of times
to set the required temperature. Programme the
cooking time with the control dial 0.
• For the combination process "Convection":
Press the combination button Microwave
Convention 6
ber of times to set the required temperature.
Programme the cooking time with the control
dial 0.
• For the combination process "Grill":
Press the combination button Microwave
Grill e
mes to set the grilling process. Programme the
cooking time with the control dial 0.
• For an automatic menu: Select the desired auto
matic menu using the control dial 0. Repeatedly
press the button Weight/Kitchen Timer w
until the desired weight appears in the
display 1.
2. Press the button Clock/Timer 8
display 1 shows the currently set time and the
hour digit flashes.
Turn the control dial 0 to programme in the
3.
hours.
the appropriate number of
7 until
the appropriate num
the appropriate number of ti
4. Press the button Clock/Timer 8
the minute figure flashes.
5. Turn the control dial 0 to programme in the
minutes.
Press the button Start/Quickstart 0
6.
hourglass appears in the display 1.
The microwave oven automatically starts the
cooking process at the programmed time.
Take note:
To query the saved start time, press the button
Clock/Timer 8
The saved start time will be shown in the display 1.
To delete the saved start time and thus cancel the
programmed procedure, press the button Clock/
Timer 8
in the display 1. Then, while the start time is to be
seen in the display 1, press the button Stop/Child
safety
extinguishes. The saved procedure is deleted.
. The
- 20 -
.
so that the set start time appears
q. The hourglass in the display 1
, now
. The