Defrosting; Preset Start Time (Preset) - Silvercrest SMW 800 C3 Bedienungsanleitung

Defrosting

You can use this function to defrost meat, poultry
and fish. The defrosting time and the power level
are calculated and set automatically once you
have entered the weight.
1) Press the defrost button
appears in the display
2) Use the control dial
of the food to be defrosted. You can enter
a weight of between 100 g and 1800 g.
3) Press the Start/Quick start button
The appliance calculates the defrosting time
automatically. It appears in the display
starts to count down.
After about 1/2 the time you will hear some beeps
and „turn" appears on the display
door and turn the food. Close the door again and
press the Start/Quick Start button
the defrosting process.
NOTE
If you wish to dispense with turning, simply
ignore the beeps. The defrosting programme
will continue despite the beeps!
│ GB │ IE │ NI
■ 18
. The icon
.
to enter the weight
.
and
. Open the
to resume

Preset start time (Preset)

With this programme, you can preset a specific start
time to cook or grill your food. If the programming
is carried out correctly, the appliance starts auto-
matically at the programmed time.
TIPS
► The clock must be correctly set to be able to
select the function "Preset start time".
► The "Preset start time" function does not work
in combination with the "Defrost" function,
automatic programme 5 or the quick start
function.
1) Set the desired microwave function (cook-
ing, grilling or automatic menu (except auto
programme 5)):
–
For microwave operation: Press the micro-
wave button
level and adjust the cooking time with the
control dial .
–
For grill operation: Press the Grill button
to activate the grill function. Set the desired
grilling time with the control dial
–
For the automatic menu: Use the control
dial to select the appropriate programme
for your food (excluding auto programme 5).
Confirm your selection by pressing the Start/
Quick Start button
dial to set the desired weight/number
of servings.
2) Press the Timer/clock button
flashes on the display
appear in the display
3) Turn the control dial
4) Press the Start/Quick Start button
now the minutes appear.
5) Turn the control dial
, select a power output
.
. Turn the control
. "01:"
and the icon will
.
to program the hours.
,
to program the minutes.
SMW 800 C3