Herunterladen Inhalt Inhalt Diese Seite drucken

Parts And Components; Before Use; Product Installation - cecotec READY WARM 800 THERMAL CONNECTED Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für READY WARM 800 THERMAL CONNECTED:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 22
ESPAÑOL
a la humedad, sumergido en algún líquido o substancia corrosiva, así como cualquier otra falta
atribuible al consumidor.
Si el producto ha sido desarmado, modificado o reparado por personas no autorizadas por el
SAT oficial de Cecotec.
Si la incidencia ha sido originada por el desgaste normal de las piezas debido al uso.
El servicio de garantía cubre todos los defectos de fabricación durante 2 años en base a la
legislación vigente, excepto piezas consumibles. En caso de mal uso por parte del usuario el
servicio de garantía no se hará responsable de la reparación.
Si en alguna ocasión detecta una incidencia con el producto o tiene alguna consulta, póngase
en contacto con el Servicio de Asistencia Técnica oficial de Cecotec a través del número de
teléfono +34 96 321 07 28.
28
READY WARM 800/1200/1800/2000/2500 THERMAL CONNECTED

1. PARTS AND COMPONENTS

Fig. 1.
1.
Control panel
2.
Power button
3.
Feet
4.
Panel
Accessories and tools
Fig. 2.
A.
Fixing bracket
B.
Plugs and fixing screws
C.
Hooks
D.
Plugs and screws
E.
Rear part screws
F.
Feet screws

2. BEFORE USE

Note: It is normal to notice an unusual smell when the heater is switched on for the first time.
Allow the device to work in a well-ventilated area for two or three hours.
Take the product out of the box and remove all packaging materials.
Make sure the product is in good conditions.
Inspect all parts of the appliance for visual damage. Unwind the power cord completely and
inspect it for damage. Do not use the appliance if it or its cord have been damaged or are not
working properly.
In case of damage, contact the official Technical Support Service of Cecotec for advise,
repairs, or returns.
Make sure you have read and understood all instructions and warnings in this instruction
manual. Pay particular attention to the safety instructions on previous pages.

3. PRODUCT INSTALLATION

This device can be installed on the floor or on the wall (feet and wall mounting fixings are
provided).
Note:
The device must never be installed underneath a mains wall socket.
READY WARM 800/1200/1800/2000/2500 THERMAL CONNECTED
ENGLISH
29

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis