Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Using smartLAB®nG Blood Glucose Test Strips
Use only with smartLAB®nG Blood Glucose Systems.
•
•
Run a control solution test every time you open a new box of
test strips (See Chapter „Control Solution Testing.")
•
Keep the test strips in their original bottle.
•
After you take a test strip out of the bottle, tightly close the
bottle immediately. This keeps the test strips dry.
•
Use the test strip within three minutes after taking it out
of the bottle.
•
The strip is for single use only. Do not reuse it.
•
Record the date you open the test strip bottle. Be sure to
check the expiration date on the test strip bottle. The test
strip is good for 6 months from the date the bottle is opened
or until the expiration date on the bottle, whichever comes
first.
•
Store the test strip bottle and your system in a cool dry
place.
•
Store the test strips between 2°C
not freeze.
•
Do not apply blood or control solution to the test strip be-
fore you insert it into the system.
•
Do not touch the test strip with wet hands. Do not bend,
cut, or twist the test strips.
30°C (36°F - 86°F). Do
~
60
Werbung
Kapitel
Inhaltsverzeichnis
