Iii. Setup & Functions; Insert And Changing Batteries - HMM Diagnostics smartLAB sprint nG Bedienungsanleitung

III. Setup & functions

Insert and changing batteries

1. Open the battery
door on the back of
the meter by push-
ing the tab in the
direction of the ar-
row and pulling the
Note:
1. Remove the batteries when you will not be using the meter for
one month or longer.
2. Values won't be deleted when the batteries are replaced.
Meter, batteries, lancets, test strips etc. must be
disposed of according to local regulations at the end
of
2. Insert two bat-
teries and the me-
ter beeps.
their usage.
3. Put the battery
door back in place
and snap it closed.
The meter turns on
automatically.
57