Dimplex Winslow 36" Benutzerhandbuch Seite 12

Operation
Remote control
Remove the battery cover on the back of the remote by sliding downwards and
insert 2 x AAA batteries ensuring that the batteries are fitted correctly. Refit the
battery cover.
For remote to function make sure the fireplace is plugged in and the ON / OFF Power
Switch on the fireplace is in the ON position. Each time the fireplace receives a
remote signal, the ember bed blink once.
Point the remote control directly towards the fireplace and press the appropriate
button to operate the fireplace. The remote has a memory function which will restart
the fireplace with the last settings except for the Sleep timer function which will
always reset to OFF.
Setting the current time of the remote control
Press and hold the button for 5 seconds to enter
the setting current time state. At this time,
will flash. You can press the or button to set the
current day of the week, 1 to 7 is optional. And press
the or button to set the current time of the hour,
0-23 is optional. And press the or
set the current time of the minute, 0-59 is optional. For
example, the current time is 8:42 pm on Friday and the
remote control displays as follows show (fig.2).
No action for 5 seconds or press button to confirm
the current time.
,
button to
- 22 -
Operation
7 day timer function
NOTE: Ensure that the current time setting accurate, otherwise the effective
time of the 7 day timer function will be different from what you set.
Press and hold the button for 5 seconds to enter the 7 day timer function. At this
8 27 888
time, , , , will flash. You can press the
C
of the week, 1 to 7 is optional. And press the
turn on the fireplace, 18-27 and ON is optional, ON means the heating keep working.
And press the button to set the time (hours) to turn on the fireplace, 0-23 is optional.
And press the button to set the time (hours) to turn off the fireplace, 0-23 is optional.
For example, If the temperature is 26 0 C when turn on the fireplace at 7 PM on Tuesday,
and turn off the fireplace at 8 AM on Wednesday, the remote control displays as follows
show(fig.3 & fig.4).
No action for 5 seconds or press button to confirm the 7 day timer function.
or button to set the desire day
. button to set the temperature when
- 23 - www.dimplex-fires.eu
EN