Operation - PROUSER RVC3620N Bedienungsanleitung

OPERATION

The monitor will automatically turn on when the vehicle is in reverse gear.
There are 5 control buttons available for users to have their controls:
Power button
Press the POWER button to supply power to the monitor. When the monitor image is on,
the blue LED will be lit. If there is power to the monitor, but the monitor image is OFF,
the blue LED will blink on and off. When the monitor power is off, no picture can appear
on the screen and the blue LED will be off.
Menu button
Press the Menu button to enter the menu screen as shown below:
To change the orientation of the screen image, press the menu button until direction is
selected. By pressing the + or - button repeatedly, different screen orientations will be
To exit the menu screen, select exit on the screen.
Guideline button
This camera system has the option to show distance-
guidelines on the display. This helps you to visually see
the distance between the objects behind your car. By
pressing the guideline button, you can switch this option
on and off.
Channel switch buttons
When menu is not activated, press + or – buttons to
switch from one channel to another channel, so you can choose to see the image from
the rear of the vehicle or from the rear of your trailer.
Repeat pressing the Menu button to select Brightness,
contrast, colour or direction of the picture.
Press the + button or – button to adjust settings within the
control selected. Press the + button to increase the value and
press the – button to decrease the value.
available. These different views allow you to
mount the camera and monitor in any
position with keeping the right picture on the
monitor.
7
Menu button
Power button
Guideline button