Changing The Light; Starting To Use; Energy Saving Tips - Blaupunkt 5SB 89030 Montage- Und Gebrauchsanweisungen

2.4 Changing the Light

Any replacement or maintenance of the LED lamps is intended to be made by a qualified person.

2.5 Starting to use

2.6 Energy saving tips

l The appliance should be located in the coolest area of the room, away from heat producing appliances or
heating ducts, and out of the direct sunlight.
l Let hot foods cool to room temperature before placing in the appliance. Overloading the appliance forces
the compressor to run longer. Foods that freeze too slowly may lose quality, or spoil.
l Be sure to wrap foods properly, and wipe containers dry before placing them in the appliance. This cuts
down on frost build-up inside the appliance.
l Appliance storage bin should not be lined with aluminum foil, wax paper, or paper toweling. Liners interfere
with cold air circulation, making the appliance less efficient.
l Organize and label food to reduce door openings and extended searches. Remove as many items as
needed at one time, and close the door as soon as possible.
l Before initial start, keep the refrigerator still for half an hour before connecting it to
power supply.
l Before putting any fresh or frozen foods, the refrigerator shall have run for 2-3
hours, or for above 4 hours in summer when the ambient temperature is high.
l Spare enough space for convenient opening of the doors and drawers.
l The picture above is only for reference. The actual configuration will depend on the
physical product.
33