Beginning Work With The Machine - Taski swingo 455E Bedienungsanleitung

Notice:
For a precise dosage, use the scale in the
dosage cup.
The filling level mark on the tank corre-
sponds to the mark in the dosage cup. The
type of machine is noted in the dosage
cup!
Dosing examples:
Information on the packing
of the product
0.25% 25 ml for 10l
of water
0.5% 50ml for 10l
of water
• Fill the dosing cup with a suitable product and pour the con-
tent into the fresh water tank. Repeat the procedure until
the required dosing is reached.
• When dosing is finished, the dosing cup will remain in the
tank.
Pre-cleaning
Attention:
Remove any objects (wooden, metal parts
etc.) from the cleaning surface.
The objects could be catapulted by the ro
tating tool, and thereby cause injuries to
people and damage to the environment.
Tank capaci- Product volume
ty per tank filling
22l 50 ml = 0.05ll
22l 100ml = 0.1l

Beginning work with the machine

Attention:
Always wear slip-resistant shoes and ap-
propriate working clothes when working
with this machine!
Attention:
Start familiarization with the machine by
making your first driving attempts in a free
area.
Cleaning start
• Lower the squeegee.
• Plug the power supply cord into the mains socket.
• Switch on the machine (main switch).
Switch lights up
• Unlock the foot pedal and lower the
-
tool slowly.
• Switch off the suction unit.
Switch lights up
• Press the switch cleaning solution.
Switch lights up
• Use the quantity control to dose the
cleaning solution.
Notice:
Diversey recommends a sustainable work-
ing by determination of the correct product
dosing quantity. Overdosing or underdos-
ing will lead to unsatisfactory cleaning re-
sults.
EN
55