auna IR-140 Bedienungsanleitung Seite 19

Note: Additional information on setting up the WPS-encrypted networks can be obtained in the user manual of
your WPS router.
Completion
The radio establishes connection with the selected network. If connection is failed, the radio returns to the previ-
ous display and prompts you to retry. If an existing network connection is lost, it would automatically attempt to
retry for reconnection.
•
Equaliser
Several preset EQ modes are available: Normal, Flat, Jazz, Rock, Movie, Classic, Pop, News.
In addition, user-defined settings are possible you can set up the equalizer with bass, treble and loudness accor-
ding to your personal taste.
•
Network
• View settings: You can check the following information on the currently connected network: Active connec-
tion, MAC address, WLAN region, DHCP.SSID, IP address, subnet mask, gateway address, first and second
DNS.
• WLAN region: Select a WLAN region for optimal WLAN connectivity: Most of Europe, USA, Canada, Spain,
France, Japan, Singapore, Australia, Republic of Korea.
• Manual settings: Select either a wireless or wired connection and activate/deactivate DHCP.
• Network profile: The radio stores the last four wireless networks that were connected and attempts each time
to reconnect to one of them. You can view a list of the registered networks. From here you can delete unwan-
ted networks by turning the SELECT control followed by pressing on it to confirm delete.
•
Language
The default language is English. To select other languages, rotate the SELECT control followed by pressing on it
to confirm.
•
Factory reset
Perform a factory reset returns the unit to factory settings. All manual settings such as time, date, network confi-
guration and presets are deleted.
The radio's current software version is not affected and remains as it was registered in the Internet-Radio- Portal.
Favourites in the Internet radio remain until newly registered with another account in the Internet portal.
• Software update
Software updates are made available from time to time. You can either check manually or let the radio to check au-
tomatically. If a new software version is found, the radio prompts you to confirm. The new software will be down-
loaded and installed upon getting your confirmation. User settings are maintained. Note: Before downloading
software, ensure that the radio is plugged into a stable mains power connection. Interrupting the mains supply
during a software download can lead to functional disturbances and/or damage to the unit!
•
Info
Displays the firmware version and the Radio ID
This radio can play thousands of radio stations and podcasts from all over the world via a broadband internet connec-
tion. When the Internet Radio mode is selected, the radio connects with the Frontier Silicon Internet radio portal to
download a list of stations. Once a station is selected, the radio will connect directly to that station.
To enter Internet Radio mode, either press MODE until the display shows "Internet radio" or select "Internet radio" in
the main menu by the use of the SELECT control.
Note: The station list menu is provided from the Internet radio portal, so it is only accessible when the radio is connec-
ted to the Internet. Station lists and submenus may change from time to time.
Internet Radio
19