Control Panel - Electrolux ESF 45030 Benutzerinformation

24 electrolux

Control panel

1 Programme guide
2 Programme knob
3 Start/cancel button (Start Cancel)
4 Multitab button (Multitab)
5 Delay start button (Delay)
6 Digital display
7 Indicator lights
8 Programme marker
9 Off position
Wash phase
Dry phase
Multitab
1)
Salt
1)
Rinse aid
1) When the salt and/or rinse aid containers are empty, the related indicator lights do not come on while
a washing programme operates.
Programme knob
• To switch on the appliance or to set a
washing programme, turn the programme
knob clockwise or counterclockwise. The
programme marker on the programme
knob must agree with one of the washing
programmes on the control panel. If the
programme marker agrees with a washing
Indicator lights
The wash phase indicator light comes on when the washing phase or the
rinsing phase operates.
The dry phase indicator light comes on when the drying phase operates.
The multitab indicator light comes on when the multitab function is active.
The salt indicator light comes on when it is necessary to fill the salt container.
Refer to the chapter 'Use of dishwasher salt'.
After you fill the container, the salt indicator light can continue to stay on for
some hours. This does not have an unwanted effect on the operation of the
appliance.
The rinse aid indicator light comes on when it is necessary to fill the rinse aid.
Refer to the chapter 'Use of rinse aid'.
9
programme, the digital display shows the
time duration of the programme. If the pro-
gramme marker does not agree with a
washing programme, the digital display
shows two horizontal bars.
• To switch off the appliance, turn the pro-
gramme knob until the programme marker
agrees with the off indicator.
8