Special Accessories - Kärcher SCP 9000 Betriebsanleitung

The figures of the following special accessories can be found on page 4 of these instructions.
6.997-347.0 Suction hose, by the meter, 3/
4" (19 mm) 25 m
6.997-346.0 Suction hose, by the meter, 1"
(25.4mm) 25 m
6.997-351.0 Stainless steel prefilter
6.997-359.0 Pump connection G1 (33.3
mm) incl. Check valve
6.997-419.0 Flat hose - Set 1" (25.4 mm),
10 m
18

Special accessories

Vacuum-tight spiral hose, to be cut into individual
lengths. Can be used as individual suction assem-
bly combined with connections and suction filters.
The removable stainless steel prefilter increases
the functional safety of the immersion pump and
protects the pump impeller from clogging.
Suitable for 3/4" (19 mm) or 1" (25.4 mm) hoses.
With G1" (33.3 mm) threaded connection. Insert the
backflow valve instead of the flat seal to prevent the
water from returning into the pump.
Flexible flat hose made of PVC and woven textile in-
sert with zinc-coated hose clamp 25 - 40 mm. Espe-
cially recommended for floods to transport the
water. Max. operating pressure: 0.4-0.5 MPa (4-5
bar)
– 10
EN