Troubleshooting; Ec Declaration Of Conformity; Ukca Declaration Of Conformity - National Geographic WIFI Weather Center 7in1 Bedienungsanleitung

51 Troubleshooting

Problem
The 7-in-1 wireless sensor
connection is interrupted or
has no connection
The wireless indoor sensor is
temporarily interrupted or dis-
connected
No WIFI connection
Data is not sent to wunder-
ground.com or weather-
cloud.net.
Wunderground Precip. Ac-
cum. Total graph offset 1
hour reset time (during sum-
mer time)
Rainfall is not correct
Temperature reading too
high during the day

52 EC declaration of conformity

Hereby Bresser GmbH declares that the radio equipment type with 9080600 complies with Directive
2014/53/EU. The full text of the EC declaration of conformity is available at the following Internet ad-
dress www.bresser.de/download/9080600/CE/9080600_CE.pdf

53 UKCA Declaration of Conformity

Bresser GmbH has issued a "Declaration of Conformity" in accordance with applicable
guidelines and corresponding standards. The full text of the UKCA declaration of conform-
ity is available at the following internet address: www.bresser.de/download/9080600/
UKCA/9080600_UKCA.pdf
Bresser UK Ltd. • Suite 3G, Eden House, Enterprise Way, Edenbridge, Kent TN8 6Hf,
Great Britain
62 / 96
Solution
1. 1. Make sure that the sensor is within the transmission range.
2. 3. If it still does not work, reset the sensor and resynchronize it with
the base station.
1. 1. Make sure that the sensor is within the transmission range.
2. 2. Make sure that the displayed channel matches the channel selec-
tion on the sensor
3. 3. If it still does not work, reset the sensor and resynchronize it with
the base station.
1. Check whether the WIFI symbol is shown on the display. It should al-
ways be displayed.
2. 2. Make sure that you connect to your WIFI router using the 2.4G
band and not the 5G band.
1. 1. Make sure that your Station ID and Station Key are correct.
2. Make sure that the date and time on the tablet are correct. If they are
incorrect, you may be reporting old data rather than real-time data.
3. Make sure that your time zone is set correctly. If it is set incorrectly,
you may report old data rather than real-time data.
1. 1. Make sure that the device's time zone is correctly set to Wunder-
ground.
2. 2. Make sure that the time zone and daylight saving time on your
base station are correct.
3. If you have located your station outside the U.S. time zone region in
Wunderground, daylight saving time is invalid. To solve this problem,
please disable the DST function in the base station.
1. 1. Please keep the rain collector clean
2. 2. Make sure that the tipping bucket inside can function smoothly.
1. 1,5. Place the sensor in an open area and at least 1.5 m above the
ground.
2. 2. Make sure that the sensor location is not too close to heat gener-
ating sources or obstacles such as buildings, pavement, walls, or air
conditioning units.