Firmware Update; Technical Data - National Geographic WIFI Weather Center 7in1 Bedienungsanleitung

1 Enter the server URL: http://ws.awekas.at
3 Enter password

49 Firmware update

1. Download the latest firmware (if available) to your PC/Mac. You will find the download on page 2.
2. Set the base station into AP (Access Point) mode and connect to the base station (192.168.1.1)
and go to the Advanced Setup page.
3. Click the browse button and navigate to the firmware file you have downloaded. Click on Upload to
start the transfer.
4. The base station will now execute the update automatically. Do not disconnect the base station
from the power supply. The base station will restart once the update is completed.
Note:
• The base station will stay in AP mode for you to check the firmware version and all the current set-
tings.
• You might have to re-enter all data.
• Then press the WIFI / SENSOR button for 6 seconds to leave AP mode.
• The firmware update process has potential risks that cannot guarantee 100% success. If the up-
date fails, please repeat the above steps to perform the update again.

50 Technical data

Base unit
Power supply
Temperature unit
Time display
Time format
Calendar display
Time signal
DAYLIGHT SAVING TIME (DST)
Dimensions
Weight (incl. batteries)
Multisensor
60 / 96
2 Enter username
5V DC 1A power adapter
backup: 1x CR2032
°C/°F
HH:MM / weekday
12 or 24 hours
DD/MM
Through Internet time server to synchronize the
UTC
AUTO / OFF
136 x 168 x 24 mm (W x H x D)
370 g
1
2
3