11 Add another weather service (e.g. AWEKAS).
13 Select time server
15 Enter latitude
17 Select the direction (e.g. for EU countries the
longitude is "East" and for the USA it is
"West")
19 Press to complete the setting
Leave field blank if registration is not available or entries are to be made later.
**Manual setup requires additional router information (including e.g. IP address, SSID, etc)
WIFI requirements:
5. Supported devices: Intelligent devices (smart devices) with integrated WIFI AP mode (WIFI access
point) and adequate notebooks or PCs.
6. Wi-Fi standard 802.11 b / g / n, supports AP mode
7. Web browser: Internet browser that support HTML 5
Router requirements:
Wi-Fi standard 802.11 b/g/n
Supported router security type WEP, WPA, WPA2, open (for routers without password)
48 / 96
12 Enter 'Station ID' and 'Station Key' registered
with another service*
14 Select the time zone of your location
16 Enter longitude
18 Select the hemisphere in which the sensor is
located (for USA and EU countries "N", for
Australia "S".