Hayward NAVIGATOR POOLVAC V-Flex Anwenderhandbuch Seite 37

Reading Too High?
If the black disk is outside of the box on the "MAX" side and you
have connected your hose to the skimmer, reduce the vacuum/
water flow by using one of the following:
• Suction Valve(s) in the filter system
• Hayward Regulator Valve
To install the Regulator Valve:
1. Remove the hose from the Skimmer Cone.
2. Close the Regulator Valve by rotating the blue collar clockwise
until tight.
3. Insert the Valve into the Skimmer Cone and the hose end into the
Valve.
4. Turn the filter system on and allow it to eliminate any air in the
system.
5. Turn the blue collar counterclockwise until proper reading appears.
REGULATOR
VALVE
CONE ADAPTER
TO PUMP
11