Heatscope VISION 3200 Original Montage- Und Gebrauchsanleitung Seite 9

A M B I E N T H E A T I N G S O L U T I O N S
is noticably cooled down. If buried cables are used, switch off the power using an omnipolar switch. Wait
at least 30 minutes after the last use before you start cleaning it. All surfaces should be cleaned using a
damp cloth only. Never use cleaning products containing alkaline substances such as sodium hydroxide
or soap, surfactants or solvents such as alcohol. Use only a very soft cloth or a brush for the reflector and
the heating elements.
17. Always remember to switch off the unit after use.
EN
Models
hEATScOPE® SPOT – manual control, 4 core cable
SPECIFICATIONS: ON/OFF + 2 manually switchable power levels (100% or 50%)
MHS-SM2800AB.100, MHS-SM1600BK.100, MHS-SM2200BK.100, MHS-SM2800BK.100
MHS-SM1600WT.100, MHS-SM2200WT.100, MHS-SM2800WT.100, MHS-SM2800SW.100,
HEATSCOPE® SPOT – 2 power levels, remote controllable, 3 core cable
SPECIFICATIONS: ON/OFF + 2 remote controllable power levels (100% or 50%), IR remote control
MHS-SP2200AB.100, MHS-SP2800AB.100,
MHS-SP1600BK.100, MHS-SP2200BK.100, MHS-SP2800BK.100,
MHS-SP1600WT.100, MHS-SP2200WT.100, MHS-SP2800WT.100, MHS-SP2800SW.100,
hEATScOPE® VISION – manual control, 4 core cable
SPECIFICATIONS: ON/OFF + 2 manually switchable power levels (100% or 50%, external)
MHS-VE2200AB.100, MHS-VE3200AB.100
MHS-VE1600BK.100, MHS-VE2200BK.100, MHS-VE3200BK.100,
MHS-VE1600WT.100, MHS-VE2200WT.100, MHS-VE3200WT.100
HEATSCOPE® VISION – remote controllable, 3 core cable
SPECIFICATIONS: ON/OFF + 2 remote controllable power levels (100% or 50%), IR remote control
MHS-VT1600AB.100, MHS-VT2200AB.100 MHS-VT3200AB.100,
MHS-VT1600BK.100, MHS-VT2200BK.100, MHS-VT3200BK.100,
MHS-VT1600WT.100, MHS-VT2200WT.100, MHS-VT3200WT.100
Tel.: +49 8104 647090 · Fax: +49 8104 647099 · E-Mail: mail@munich-home-systems.de · www.munich-home-systems.de