Call Tone; Voice-Controlled Send Function (Vox) - Silvercrest PMR-1200 Bedienungsanleitung Und Serviceinformationen

SilverCrest PMR-1200
How to enable the baby monitor:
How to disable the baby monitor:

6.6 Call Tone

The call tone is an audible signal that alerts other stations that you want to transmit a
message. The PMR-1200 supports 15 call tones.
Selecting the Call Tone
Sending the Call Tone
1. Press (7). The call tone will be sent over the current channel.

6.7 Voice-Controlled Send Function (VOX)

This function is similar to the hands-free feature of your mobile phone. The PMR will start
transmitting as soon as it detects your voice (or another noise). This allows you to send a
message without pressing the PTT button (13). Use of this function is not recommended
when you are located in a noisy or windy environment.
18
1. Press the
sensitivity will blink on the display. In addition, the BABY icon
(18) will display.
2. Press to enable the baby monitor.
3. Press the or
can set sensitivity values between 1 (low) and 3 (high).
4. Press the PTT button (13) to confirm the setting.
1. Press the
sensitivity will blink on the display. In addition, the BABY icon
(18) will display.
2. Press to disable the baby monitor. The display will read
"OF".
3. Press the PTT button (13) to confirm the setting.
1. Press the button (5) four times. The
2. Press the or
3. Press the PTT button (13) to confirm the setting.
4. To disable the call tone, select "OF".
button (5) three times. The current VOX
button to set a different sensitivity. You
button (5) three times. The current VOX
button to set a different call tone.
Advanced Operation
icon will display.
English