Advanced Operation; Function Button; Setting A Different Channel - Silvercrest PMR-1200 Bedienungsanleitung Und Serviceinformationen

SilverCrest PMR-1200

6. Advanced Operation

6.1 Function button

The function button (5) allows you to customise your PMR. The following table lists the
different functions that are available. A description of the functions can be found on the
corresponding page.
Function button
Press once
Press twice
Press three times
Press four times
Press five times
Press six times
Press seven
times
Press eight times
Press nine times
Press ten times
Press eleven
times
If no button is pressed for 5 seconds while changing a setting, the unit will return
to receive mode and changes are applied.

6.2 Setting a Different Channel

When setting a different channel, this needs to be done on both PMR sets in order for you
to be able to communicate with the remote station.
16
Function
Switch channel
Switch CTCSS/CDCSS code
Baby monitor
Call Tone
Sensitivity for voice-controlled transmit
function (VOX)
Squelch level
Dual Scan
Power-saving function (auto power-off)
Button sound on/off
Chronometer
Roger Beep On/Off
1. Press the
will blink on the display.
2. Press the
3. Press the PTT button (13) to confirm the setting.
button (5) once. The current channel number
or button to set a different channel.
Advanced Operation
Detailed description
See page 16
See page 17
See page 17
See page 18
See page 18
See page 19
See page 20
See page 21
See page 21
See page 22
See page 22
English