Function Menu - Schubert Subi88 Harmony Bedienungsanleitung

FUNCTION MENU

Pressing[FUNCTION MENU]button to enter into function menu, LCD displays present function menu
option temporarily,to set the parameters of present menu by pressing [-] / [ +] buttons..
Nr. Inhalt
1 Melodie
2 Tastaturteilung
3 Takt
4 Metronomlautstärke
5 Halltiefe
6 Chortiefe
7 MIDI Empfand
8 MIDI Sendung
Note: If there is no any setting operation in 5 seconds in function menu setting state.the function menu
state will exit automatically.
Tune setting
This function is used to adjust pitch detailedly.
1. Pressing the FUNCTIN MENU button to select tune menu. LCD displays "xxx Tune"temporarily, You
can press [+]/[-]buttons to adjust pitch.the largest adjustment range is ±50, it is to rise or reduce one
half-tone.
2. Pressing [ +] and [-] buttons at the same time.the pitch will recover to presetting value: 000.This
parameter adjustment is valid for keyboard and styles.
Keyboard split setting
The position to split auto bass chord area and right hand area in keyboard is called "KEYBOARD SPLIT
POINT".The keyboard in left hand area are used for controlling auto bass chord accompaniment generally
when auto bass chord function was opened.the keyboard in left hand area also can be used for playing
voice.
1. Pressing[FUNCTION MENU]button to choose keyboard split point setting menu.LCD displays "xxx
KeySplit"temporarily. You can press [-]/[+]buttons to set keyboard split point at this time, you also can
play keys directly to do prompt setting. The adjustment range: 1 -88.
2. Pressing [-)and[+]buttons at the same time.the keyboard split point will recover to presetting value.
Beat type setting
1. Pressing [FUNCTIN MENU)button to choose beat type menu,LCD displays "xxx
BeatType"temporarily,You can press [-)/[+)button to choose beat type at this time,this funtion supplys
0, 2~9(total 9 kinds of beats)for your selection.
LCD-Anzeige
Tune
Keyboard split
Beat type
Metronome volume
Reverb depth
Chorus depth
MIDI Receiving
MIDI Sending
Anpassungsbereich voreinge-
stellter Wert
-50 - +50
1 – 88
0, 2 – 9
0 – 127
0 – 127
0 – 127
1 – 16, ALL
1 – 16
EN
000
034
004
080
050t
000
ALL
001
43