Schubert Subi88 Harmony Bedienungsanleitung Seite 37

Power switch
1. Firstly, Please make sure that the power had been connected correctly.
2. Press down Power button, LCD display screen will become lighter, displaying
boot screen, indicating that the piano had been opened.
Note: If the LCD screen has not been lit when you pressed down POWER
button, please check that whether the power was connected correctly.
Adjust the volume
Rotate Master Volumeknob to the right after the piano was opened. The overall
volume will become higher from lower. Rotate Master Volume knob to the left,
the overall volume will become smaller from larger.You can adjust the volume
based on your requirement.
Play various kinds of instruments voice
• This piano has built-in hundreds kinds of vivid voice, including the timbre of
chinese folk music, percussion tone etc.
• The detailed information, please see voice list.We also supply the effect
function that it is relative to voice for your better playing voice.
Choose and play voice (Master voice)
1. Pressing the TONE button, The voice selection mode can be entered into,
the reminding mark "R1"lights in LCD at the same time, moreover, the
present voice name and no. display as well.
2. Using number button and +/- button to choose the voice that you need.
3. To play keys to start play and appreciate wonderful voice.
To change voice selection sourcing you can press Voice button again and
again if you had opened dual voice function. The corresponding R1/R2/L
cursor will switch to light to display in LCD display screen.
Play two kinds of voice Dual voice
This piano has a dual voice function. The casual two kinds of voice can be super-
posed and sounded at the same time by this function, The new voice effect will
occur to enrich the layers of music. It seems that two kinds of instruments play
at the same time. The voice will be fist "R1"voice before the dual voice function
was started, The chosen voice will be second "R2"after dual voice function had
been started.
1. Pressing Dual voice button to open dual voice function, The "R2"mark lights
in LCD, the present dual voice name and No. Display as well at the same time.
2. To choose the dual voice that you want to play by number buttons and
EN
37