Auto Bass Chord; Status Memory Function - Schubert Etude 255 LCD Bedienungsanleitung

EN
3. Stop rhythm
During the accompaniment rhythm, press [ START/STOP ] to stop the
accompaniment rhythm.
Metronome
The metronome contains four tempos, 1/4, 2/4, 3/4 and 4/4, respectively.
Press the [Metronome] continuously to select the four tempos. Press the
[Metronome] bottom again to stop the tempo.
Tempo adjustment
Press [ TEMPO + ] or [ TEMPO – ] to increase or decrease the rhythm speed.
Pressing the two buttons simultaneously may reset to the default.

AUTO BASS CHORD

Single chord When the rhythm is activated, press [ SINGLE ]. After the "Sin" is
shown on the screen, you can play a single chord on the keys in the chord zone
of the keyboard.
Press [ SINGLE ] again, "OFF" will be shown on the screen, and the single chord
function will be disenabled.
Single chord fingering
(see Appendix A)
]
Fingered chord fingering
(see Appendix B)
When the rhythm is activated, press [ FINGERED ]. After the "Fin" is shown on
the screen, you can play a figured chord on the keys in the chord zone of the
keyboard. When [ FINGERED ] is pressed again, "OFF" will show on the screen,
and the fingered chord function will be disenabled.

STATUS MEMORY FUNCTION

With the status memory function, you can save the tone, rhythm, tempo and
other parameters to be changed during playing, for fast shifting. This keyboard
is equipped with 3 status memories, which can be flexibly called at any time
during playing.
Storage of Status Memory
Set the tone, rhythm, tempo and chord as required, and then press the
21