Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
INSTALLATION
Assembly parts
Piano body assembly
1. Using 1 pcs of plum-blossom M6 screw to fix on the plastic pedal box
2. Press 10 pcs of nuts into the corresponding holes of left & right stand board, left & right stand pillars
and connection board
3. Using 6 pcs of TM6*50 screws to connect left & right stand board and left & right stand pillars with the
2 pcs of fallen feet.
4. Using 4 pcs of TM6*50 screws to connect left & right stand board with connection board through 4 pcs
of M6 screw caps separately, then close the caps.
5. Using 4 pcs of TM6*50 screws to connect stand board and pedal box through 4 pcs of M6 screw caps
separately , then close the caps.
6. Put the piano body on the piano stand, and then fix it with 6 pcs of TM6*20 screws.
7. Plug the MIDI pedal connection line into the sustainjack on the back of piano.
EN
33
Werbung
Kapitel
Inhaltsverzeichnis
