Schubert Subi88 Harmony Bedienungsanleitung Seite 38

EN
+/-buttons.
3. The voice effect that was superposed by two kinds of different voices can
be heared when you play the keyboard, it seems that two kinds of instru-
ments are playing at the same time.
4. Press Dual voice button again, the dual voice effect can be closed,
"R2"cursor goes out in LCD, LCD display screen recovers previous state.
.When the music range of keyboard was divided, Only the keyboard in right
hand area has dual voice function, the keyboard in left hand area doesn't
have this function.
Lower
The lower function splits the keyboard into two independent sections by the
key split point and each section has different voice. The left section voice is
lower voice, and the key split point can be set on any key as required.
1. Pressing the LOWER button to start lower function. The LCD displays the
current lower voice name and number, and the indication "L" and "SPLIT".
2. You can use the data dial, number button or [+]/[-]button to select the
lower voice you want to play.
3. Play the keyboard in different sections, and you will hear two different
voices.
4. Press LOWER button again will turn lower function off, "L" will goes out on
LCD, LCD display screen recovers previous state.
Keysplit: The position to split master voice or double voice from lower voice
in keyboard is called "KEYSPLIT". The default setting for the keysplit is F#3
(34).
You can also set the keysplit anywhere else on the keyboard, as described in
the function menu Settings section for details.
Touch Response
The keyboard of this piano has touch response function, It can help to enrich
performance expression.It can reflect the touch that you had used to every
notes correctly, It seems that you are playing real instrument.This piano has
three pcs touch curves for choosing.
1. Press Touch button to enter into touch function choosing state.The touch
curve no.of present keyboard displays in LCD screen temporarily , The de-
fault touch curve is second one in Boot-Up State, there are three pcs touch
curves in total(001-003).
2. Choose touch curve In the state of touch curve that displays in LCD screen
temporarily, you can choose different touch curves by press Touch button
continuously.
3. Close touch response
4. The present touch displays "OFF" in LCD, The relative "Touch" state mark
goes out in LCD, it indicates that present keyboard is without touch re-
38